Monark LT2 Guía para resolver problemas descargar pdf (Pagina 8)

LT2

Cycle adjustments

Adjustments of the bike

Crank Steel, 52T, 172.5 mm

standard, Q 146 mm

Pedals 9/16”, combi SPD / Clips

Saddle Moody

Seat post Vertically: 530-940 mm

(21"-37")

Horizontally: 60 mm

(2 1/3")

Handlebar Racing,

Ø31,8 mm at clamp

Handlebar stem Vertically: 500-910 mm

(19.7” - 35.8”)

Horizontally: 60 mm (2 1/3")

Distance saddle - handlebar 170-815 mm

(6.7" - 32")

Cycle adjustments

Seat height should be adjusted to a comfortable

position. The appropriate height is to have the knee

slightly bent when the sole of the foot is centred over

the pedal axle with the pedal in the bottom position.

When adjusting the saddle height and vertical

position, loosen the respectively locking handles. See

Fig: Saddle adjustment.

The handlebar setting should be in a comfortable

position when cycling. During longer exercise sessions

it is recommended to occasionally change handlebar

position. The handlebar can be adjusted both

horizontally and vertically. This is done by loosening

the respective locking handles. See Fig: Handlebar

adjustment.

NOTE! Be sure that the stem and seat post are inserted

to at least 100 mm in the frame. This is marked with

“MAX” on the stem.

Fig: Saddle adjustment

Fig: Handlebar adjustment

The following procedure ensures that the bike works

for daily use.

Check the HR function if you use chest belt, see •

section, on ‘Heart rate’.

Check the braking force by putting on a certain •

workload and check that the load is applied.

Test pedalling and check that a reasonable rpm is •

obtained - verify by a clock. Feel if the pedals move

smoothly. Listen for unusual sounds. Remedy if

necessary.

Adjust the handlebar and saddle and make sure •

they are securely attached and that the adjustment

is working properly.

Make sure the support legs are in position by •

rocking the bike. Tighten if necessary.

If something unusual is found during the daily

inspection that you cannot resolve, please call

customer service.

Validation

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comentarios a estos manuales

Sin comentarios

Monark LT2 Guía para resolver problemas Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Bicicletas de spin Monark LT2